Matrix ETERNITY NE - Digital Output Port (DOP); How to Connect a Door Lock to the DOP

Matrix ETERNITY NE System Manual 559
Digital Output Port (DOP)
What's this?
The ETERNITY NE provides a Digital Output Port (DOP) for connecting a Door Lock release relay to be used in
conjunction with the Door Phone connected to the system.
The Door Lock connected to the DOP can be opened by dialing the related Feature Command from the System
Administrator mode.
ETERNITY NE remembers the state of DOP the during power failure. If a power failure occurs while the
Door Lock device is being operated, the system will remember the last state (in this case, ON) and switch
ON the DOP when power is restored.
How to connect a Door Lock to the DOP
Refer the topic “Door Phone” for instructions on connecting a Door Lock to the DOP.
Do not connect devices that do not conform to the specifications of the DOP!
How to configure
When you connect a Door Lock to the DOP, configure DOP.
• Open Jeeves and log in as System Engineer.
• Click the Advanced Settings link, scroll to System Parameters and click the link.