Matrix ETERNITY NE - Select Trunks for Outgoing Calls

236 Matrix ETERNITY NE System Manual
Select Trunks for Outgoing Calls
If you set the SIP Trunk mode as Peer-to-Peer and selected Treat Incoming Peer-to-Peer Call as Station, select
the Trunks for Outgoing Calls.
1. Click Select Trunks for Outgoing Calls to expand.
2. Double click the Trunks allowed for dialing field. A multiple selection box opens.
• To select a trunk from the left box, place your cursor on the desired trunk, and click the Select>>
button.
• You may change the sequence of the trunks you selected, if required, using the Up and Down arrow
buttons on the right display box.
• You can also delete trunks from the ones you have selected.
• You may enable Rotation, if you have selected more than one trunk. Default: Disabled. Rotation has
no relevance if only one member trunk is selected.
• Click OK. The multiple selection box closes. All the trunks appear in the field Trunks allowed for ‘0’
dialing, in the sequence you selected, separated by commas.
• To apply Least Cost Routing, if required select the desired LCR method from the combo box, and
configure the settings, as required.