Matrix ETERNITY NE - Function Keys; Volume Control Keys

Matrix ETERNITY NE System Manual 555
• A feature like Auto Redial requires an LED to show that it has been set or canceled. So, the LED of the
DSS key to which the Auto Redial feature has been assigned will glow Red, when Auto-Redial is set,
and the LED is turned off when the feature is canceled.
• Thus the LEDs of the DSS keys function only if the LED is relevant for the feature/ function assigned to
the keys, and otherwise remain inactive.
• The LEDs of DSS keys to which features like Raid, Interrupt Request, Barge-In, Last Caller Recall are
assigned, will not glow.
Dial Pad
The dial pad consists of 12 keys (non-programmable), which include the digit keys for 0, 1-9, and character keys for
* and #.
Function Keys
These are non-programmable keys on the keypad of EONSOFT which have fixed functions.
• Redial: This key is used for redialing the last external number.
• Func Key: This key is used for accessing the Phone menu.
• Adr: This key is used for accessing the Address Book. The EONSOFT provides the facility of an Address
Book that is integrated with the Standard Windows Address Book, for storing the numbers and addresses
of contacts. So, when a call is to be made, you can select and dial the desired number from the directory.
• Spd Key: This key is used to dial by name.
• Flash: This key is used as 'Flash' key.
• Xfr: This key is used for transferring calls to another destination
• Hold: This key is used for putting the caller on hold. This key is also used to make a selection in the Phone
Menu.
• OFF-Hook: This key is used for going OFF-Hook. It simulates lifting of the handset, pressing of the
speaker key to make or receive calls.
• ON-Hook: This key is used for going ON-Hook. It simulates replacing of the handset, pressing of the
speaker key to disconnect.
Volume Control Keys
The  and  keys are used for increasing or decreasing the phone volume. Volume can be increased by clicking on
 and decreased by clicking on .
Navigation Keys
The following keys are used for navigating the phone menu:
• 'Func' key: This key is used for entering the Phone menu and to go back one level in the menu.
• Up and Down keys: The  and  keys function as the Up and Down keys to scroll the Menu and sub-
menu options. You can scroll up down the menu by clicking on  and scroll up the menu by clicking on .