Matrix ETERNITY NE System Manual 817
System Security
What’s this?
Access to the Eternity is secured at three levels by way of a password:
• at the System Engineer Level with the System Engineer (SE) password.
• at System Administrator Level with the System Administrator (SA) password.
• at the User Level with the User Password.
The System Engineer and the System Administrator passwords secure the system settings from access and
alteration by unauthorized persons (anyone other than the System Engineer and the System Administrator), thus
preventing possible misuse of the features and facilities.
System Engineer (SE) Password
The SE password is 4-digit secret code, which may be a combination of any four digits, from 0 to 9. The default SE
Password is 1234, which can be changed from Jeeves as well as by dialing a command string.
• The SE password is stored in the CPU. If you forget the SE password, the only way to restore the
default SE password is to change the Jumper settings of the CPU card.
• You are advised to record and store the SE password at a safe place, where it can be accessed by you
(the System Engineer) to avoid the inconvenience of restoring the default SE password.
Changing SE Password using Jeeves
• Log in as System Engineer.
• Click Advanced Settings to expand options.
• Click the link Password.
• Click the link SE Password.
To Next Page
Loading...
