784 Matrix ETERNITY NE System Manual
Customized SMDR-Posting Protocol
You can use customize the SMDR Posting Protocol to match the settings required by the CAS you have interfaced.
When you use Customized SMDR-Posting Protocol, you can customize the Call Detail Record format to match
your requirement.
When the Call Detail Record format is customized, if there is a gap between two fields, these fields will be 'space'
(ASCII-32).
It is also possible to customize the posting protocol to match the settings required by the CAS you have interfaced.
Setting up CAS Interface
You will need the following the following functional components are required to make the interface work:
• A computer with a spare Ethernet port (not supplied by Matrix) Or any free Ethernet Port of the LAN Switch
on which the CAS server application software is running.
• The CAS Software (not supplied by Matrix).
• The ETERNITY NE.
Now, connect the Ethernet port ETERNITY NE to the computer (on which CAS server application is running) or to
one of the Ethernet ports of the LAN Switch, if the CAS server is in the same LAN.
How to configure
Configuring the SMDR-Posting feature involves the following steps:
• Enabling storage of SMDR for Outgoing (OG) Calls. By default, OG SMDR storage is enabled. Refer
“Station Message Detail Recording–Storage”.
• Selecting the appropriate SMDR-OG Posting Protocol to be used.
• Refining the Handshake parameters, if required.
• Refining Call Detail Record format, if required.
Currency 00 00 X X X X
Call Type Indicator 00 00 X X X X
Location 00 00 X X X X
Called Number 19 18 Continuous LA Yes 032
Account Code 64 03 Fixed RA Yes 048
Remarks 00 00 X X X X
Parameter
Start Column
No.
Field
Length
Format Alignment
Filler Char.
Required?
Filler Char.
(Decimal Value)
To Next Page
Loading...
