Matrix ETERNITY NE - Printing Call Reports of Clients

310 Matrix ETERNITY NE System Manual
The Account Name List will be displayed on your DKP, alphabetically with the corresponding account
codes.
• Scroll to select the desired client name and press Enter key.
• Dial Trunk Access Code.
• Dial the client's number.
To enter Account Code Name during the call:
• Press Flash to put the called party on hold.
• Press DSS Key assigned to Account Code by Name.
OR
• Dial 1059.
• Dial the initial letter of the client's name.
The Account Name List will be displayed on your DKP, alphabetically with the corresponding account
codes.
• Scroll to select the desired client name and press Enter key.
Speech will be resumed with the called party.
Dialed the wrong account code or name?
If you have dialed the wrong account code or name while in the middle of a call, you can correct it by
dialing 'flash' again and following the steps described above. The system will override the previously dialed
account code or name.
Printing Call Reports of Clients
You can print the call details of your clients using their account codes as filter.
See “Station Message Detail Recording–Report”, for more detailed instructions on printing reports using filters.