48 Matrix ETERNITY NE System Manual
Installing the Voice Mail System
The optional Voice Mail System (VMS) module of the ETERNITY NE provides mailbox facility to all extensions of
ETERNITY NE.
Each Mailbox has the capacity of storing 254 messages. The size of each Mailbox is set by default to 5 minutes.
The maximum message length for each mailbox is set by default to 15 seconds.
The VMS module requires a license. The VMS module is delivered as Pen Drive, containing VMS configuration
files, and voice messages for prompts and greetings. The Pen Drive is also the storage device for mailbox
messages.
The Pen Drive is shipped separately as per the order of individual customers, along with the License Voucher.
Installing the VMS
• The Voice Mail System (VMS) module is supplied as a Pen Drive, with a License Voucher which you must
activate to use the module. Unpack the Voice Mail System module and verify package contents.
• Make sure power supply is turned off before you begin installation.
• Unscrew and remove the top cover of the enclosure. Keep the screws and the cover aside.
• Locate the USB port on the mainboard. Connect the Pen Drive to the upper USB port on the mainboard.
• If you have no other module(s) to install, replace the top cover and secure the cover with the screws.
• Connect a computer to the Ethernet Port of ETERNITY NE the ethernet cable supplied for the port.
• Open a Web browser on the computer to access the embedded Web server, Jeeves.
• Activate the License Voucher for the VMS. See “License Management” under Advanced Settings for
instructions.
• Configure VMS. To know more, see “Voice Mail System” to for detailed instructions.
To Next Page
Loading...
