Matrix ETERNITY NE - Last Number Redial

Matrix ETERNITY NE System Manual 627
Last Number Redial
What’s this?
This feature redials the last external number string dialed from the extension.
How it works
• Extension A dials the feature access code for ‘Redial’.
• If Extension A is an SLT, the system dials the last external number dialed from Extension A using the same
trunk access code used for dialing that number.
• If Extension A is a DKP or an Extended IP Phone, all external numbers dialed by Extension A are
displayed on the phone’s LCD.
• Extension A may select the number to be dialed out. The system will dial out this number using the same
trunk access code used for dialing this number.
• If Extension A has ‘Dynamic Lock’ set and uses Redial feature, the system will check for Toll Control as
per the Lock Level set for Extension A before dialing out the number.
How to configure
No particular configuration is required for this feature to work. Redial is included in the Basic Features allowed to all
extensions by default in their “Class of Service (COS)”. So, all extensions can use the Redial feature.
How to use
For EON & Extended IP Phone Users
• Press Redial Key.
Or
•Dial 7
A List of external numbers last dialed will appear on your phone’s display.
• Scroll to select the desired number.
• Press Enter key.
• The system dials out the external number.
For SLT Users
• Lift Handset
•Dial 7
• The system dials out the external number last dialed from your extension.