Matrix ETERNITY NE System Manual 557
Navigating the Phone Menu
To navigate the menu,
• Click 'Func' key when the phone is idle.
• Scroll by clicking on the Up/Down Key to reach the desired Menu option.
• Click 'Hold' key to select the desired Menu option.
• Scroll by clicking the Up/Down Key to reach the desired sub-menu option.
• Click 'Hold' key to select the desired sub-menu option.
To exit menu,
• Press the 'Func' key repeatedly to go back one level in the menu, till you reach 'Menu'.
Or
• Press Cancel key, if programmed.
If you want to use the Keyboard, press the Shortcut key for the desired function.
Tool Tips
You can program labels and tool tips for the DSS keys, which are displayed to the user on mouse over. You can
program the function of each key as Tool Tip, to help user in intuitive operation of EONSOFT.
To program a tool tip,
• right click the desired DSS key.
• The dialog box will show the Key Number.
• Enter the label for the key.
• Enter the Tool Tip for the key.
• Click OK.
• Repeat the same steps to program Tool Tip on another key.
• Each time you move the mouse on the key, the Tool Tip you programmed for this key will be displayed.
Call Indication
Incoming Calls are indicated by:
• Popping up of the EONSOFT window, when the window is minimized.
• Flashing of the Title Bar of the EONSOFT window, when the window is maximized.
In order for the EONSOFT window to pop up, you must have enabled the 'PopUp When Ring' option. When
this option is enabled and the EONSOFT window is minimized a new incoming call causes the window to pop
up to its full size notifying the user about the new call. When this option is enabled and the EONSOFT window
is maximized, a new incoming call is indicated by the flashing of the Title bar of the window.
When the 'PopUp When Ring' option is disabled and the EONSOFT window is minimized, a new incoming call
is indicated by the flashing of the EONSOFT Title at the bottom bar of the computer screen.
By default, the 'PopUp When Ring' option is enabled.
To Next Page
Loading...
