Matrix ETERNITY NE System Manual 53
Configuring using the Web-based GUI: Jeeves
ETERNITY NE provides a Graphic User Interface (GUI), Jeeves, the proprietary Web-based configuration software
of Matrix. It is an HTTP server built into the ETERNITY NE.
To access Jeeves, you will need to connect a computer to ETERNITY NE.
Connecting a computer
You may connect a standalone computer to ETERNITY NE or grab any computer connected in the LAN as
ETERNITY NE.
Connect a standalone computer to ETERNITY NE, when installing the system for the very first time. You
may connect it to a computer on LAN at a later stage, once you have finished installation and configuration
of the system.
To connect a standalone computer,
• Plug one end of the RJ45 cable supplied into the Ethernet Port of ETERNITY NE. Plug the other end into
the LAN port of the computer.
• Make sure the IP Address of the computer and the Ethernet Port of ETERNITY NE do not conflict and both
are in the same Subnet.
The default IP Address of the Ethernet Port of ETERNITY NE is: 192.168.1.101
The default Subnet Mask of the Ethernet Port of ETERNITY NE is: 255.255.255.0
• Change the Subnet of the computer, if necessary.
• Make sure a web-browser, either Internet Explorer 7 or 8 or Mozilla Firefox, is installed on the computer.
To Next Page
Loading...
