550 Matrix ETERNITY NE System Manual
Speaker Key LED
The Speaker Key on EON48P/48D-P/48S/48D-S is equipped with a single colour LED which glows Blue when
pressed for the speaker mode and is turned off, when you exit the speaker mode.
Since key is programmable, the LED indication pattern will be according to the feature/function you assign to this
key. For example, if you assign an extension to this key, the LED of the key will function as a tri-colour LED to show
status of the Extension. If you assign a feature that does not require any LED activity, like Call Pick-Up, the LED of
this key will remain inactive.
Volume Keys
• "+" (plus): This is the increase key, to raise the volume of speech while talking and to decrease the Ringer
volume, when the phone is ringing.
• "-" (minus): This is the decrease key, to lower the volume of speech while talking and to decrease the
Ringer volume when the phone is ringing.
Headset Connectivity
The EON48P/48D-P/48S/48D-S provides two Headset interfaces: a 2.5mm Audio Jack and an RJ11 connector at
the bottom of the phone body.
So you can use any stereo headset of standard make with a 2.5 mm single connector or a stereo headset with an
RJ11 connector.
You can also program any of the DSS keys to function as the Headset key. Refer the topic “DSS Keys” for
instructions.
Key Maps
As EON48P/48D-P/48S/48D-S may be the extension of the Operator(s) and Executives in an enterprise to meet
the varied requirements of each user group, these key maps can be customized to match the exact requirement of
individual users. Refer the topic “DSS Keys” for instructions on customizing the Key Maps.
Phone Menu
You can access the following PBX and phone features from the Menu of EON48P/48D-P/48S/48D-S:
Menu option Description
Call Logs To view call history of internal and external Missed, Answered and Dialed calls.
You can also edit numbers in the call logs and store them in the Personal Directory.
Call Forward To set and cancel Call Forward-Busy, Call-Forward No Reply, Call-Forward-
Unconditional, and Follow Me.
Dynamic Lock To change the Toll Control level of the phone.
User Status To set User Present or User Absent.
Keypad Lock To lock the keypad of the phone.
To Next Page
Loading...
