Matrix ETERNITY NE - Auto Call Back on no Reply

340 Matrix ETERNITY NE System Manual
To cancel Auto Call Back on Busy:
• Press the 'Call Back' Key.
OR
• Dial 102
• You get confirmatory message "Auto Call Back Canceled" on the phone's display. The LED of the DSS
Key will be turned off.
• Go idle.
For SLT Users
To set Auto Call Back on Busy:
• On Busy Tone.
•Dial 2.
• You get confirmatory tone
• Replace handset.
To cancel Auto Call Back:
• Pick up the handset.
• Dial 102.
• You get confirmatory tone.
• Replace handset.
Auto Call Back on No Reply
For EON & Extended IP Phone Users
To set Auto Call Back on No Reply:
• Press the 'Call Back' Key on Ring Back Tone.
OR
• Dial 2 on Ring Back Tone.
• You get confirmatory message "Auto Call Back Set" on the phone's display. The LED of the DSS Key will
be turned on.
• Go idle.
To cancel Auto Call Back on No Reply:
• Press the 'Call Back' Key again.
OR
• Dial 102.
• You get confirmatory message "Auto Call Back Canceled" on the phone's display. The LED of the DSS
Key will be turned off.
• Go idle.
For SLT Users
To set Auto Call Back on No Reply:
• On Ring Back Tone
•Dial 2.