208 Matrix ETERNITY NE System Manual
VoIP Port
• If you have enabled On-site Configuration, this page will appear if your system has detected the
presence of the VoIP module.
• If On-site Configuration is disabled, you will reach this page if you have set the flag 'Is VoIP used?’ to
‘Yes’ on the “Pre-requisites” page.
On this page,
More: Click this button to view all parameter links on the page.
Less: Click this button to view only the essential parameter links on the page.
Expand: Click to expand a link to display all parameters under the link.
Collapse: Click to collapse a link. Hides all parameters under the link.
Settings: Click to configure the settings of a parameter further.
More link: Click to view all additional parameters on the page.
VoIP Network
To Next Page
Loading...
