Matrix ETERNITY NE System Manual 731
Selective Port Access
What’s this?
ETERNITY NE supports different extension and trunk port types. In the Selective Port Access feature, each port
type is assigned a Port Access Code. Extension users can access a particular port by dialing the Port Access Code
assigned to the Port and its Port Number.
How it works
• Extension user A wants to access a particular Mobile port, Mobile Port 1 to make a call. Extension A must
dial the Selective Port Access Feature Code, followed by the Port Type Code for Mobile ports and then dial
the Port Number.
• By default, the following access codes are assigned to each Port Type:
Here, Extension A must dial 69-25-01, where 69 is the feature code for Selective Trunk Access, 25 is the
port access code for the Mobile Port, and 01 is the number of the Mobile Port which A wants to access.
Similarly, if Extension A wants to access SIP Extension 10, A must dial 69-34-010.
Port Type
Port Type
Code
Port Number
SLT 01 001 to 014
DKP 02 001 to 002
CO 03 001 to 006
Mobile 25 01 to 02
SIP Trunk 26 01 to 04
SIP Extension 34 001 to 016
To Next Page
Loading...
