70 Matrix ETERNITY NE System Manual
Extension Numbering Plan
The default Extension Numbers and Feature Access Codes
8
appear on this page.
ETERNITY NE assigns default extension numbers to the extension port types:
• 201 to 214 to SLT port number 01 to 14.
• 301 to DKP port 1 and 302 to DKP port 2 respectively.
• 303 to 318 to SIP Extensions 01 to 16.
• 215 to the Door Phone port.
The default Feature Access Codes that appear on this page are country-dependant.
To configure,
1. Click the Extension Numbering Plan link.
2. You may re-assign extension numbers to SLT, DKP, SIP Extensions, and the Door Phone port.
The length of the extension number may be 6 digits. The digits 0 to 9, # and * are allowed.
When you change the extension numbers, make sure that they do not clash with any other Feature Access
Codes in the dialing phase (codes starting with 1, 9, etc.). To know more, refer the topic “Access Codes”
and “Conflict Dialing” to know more.
If you have installed Voice Mail System, do not configure * (star) in the Extension numbers.
8. Feature access codes are short digit codes used invoke a feature or function. See “Access Codes”.
To Next Page
Loading...
