914 Matrix ETERNITY NE System Manual
System Debug
You can monitor the state of ports and IO operations, the Voice Mail System and the VoIP Ethernet port using
System Debug.
Matrix ETERNITY NE supports Syslog
73
Client for debugging. The Syslog Client enables the system to send debug
messages in syslog format to the remote ‘Syslog Server’ on the IP network. You can view the system debug
messages on the remote server.
Each debug message includes the MAC Address of Ethernet port of ETERNITY NE which sends the debug
messages to the Syslog server.
To configure Debug Settings,
• Open Jeeves.
• Log in as System Engineer.
• Click the Administration link.
• Click the Maintenance link under Administration.
• Click the System Debug sub-link. The System Debug page opens.
73. Syslog is one of the protocols used extensively for sending debug messages, and is defined in RFC 3164.
To Next Page
Loading...
