Matrix ETERNITY NE System Manual

518 Matrix ETERNITY NE System Manual
2. Malfunctioning of the System.
When there is a system malfunction, possibly caused by a configuration error that you are unable to
diagnose, you may restore default settings.
Restoring Default Settings
Default settings can be loaded or restored from the SE mode (software default).
To be able to do this, you must have the "SE password".
Whenever you restore the default settings in the system, all the programmable parameters except Network
Port Parameters
32
and the Region will be set back to their default values.
You cannot default Region; you can only select a region to load the country-specific default settings and
default the system.
• Log in as System Engineer.
•Click Advanced Settings.
115 United States
(Juneau)
GMT-09:00 Scheduled 3 02 English T3 0 81-T-XXX 6
116 United States
(Hawaii)
GMT-10:00 02 English T3 0 81-T-XXX 6
117 Uzbekistan GMT+05:00 English
118 Venezuela GMT-04:30 Spanish
119 Vietnam GMT+07:00 English
120 Yemen GMT+03:00 English
121 Yugoslavia GMT+02:00 English
122 Zambia GMT+02:00 English
123 Zimbabwe GMT+02:00 English
32. The IP Address, Subnet Mask, Primary DNS, Secondary DNS, Host Name, Domain Name, DHCP Server Address.
Country
Code
Country
Name
Default
Time
Zone
Default
DST
Mode
Default
DST
Schedule
Type
CPTG
Default
DKP
Language
Distinctive
Ring
Opr TAC
Abbr.
Dialing

Matrix ETERNITY NE Specifications

General

Brand	Matrix
Model	ETERNITY NE
Category	PBX
Language	English