552 Matrix ETERNITY NE System Manual
The EONSOFT occupies only a single port, even when both PC-based DSS64 Consoles are used. Thus it supports
all the features of the Digital Key Phone and the DSS64 Console on a single window.
DKP Port
The DKP port connects EONSOFT to the DKP port of ETERNITY's DKP card.
Handset Port:
The Handset port connects the Receiver of the phone, to be used for speech. The EONSOFT has the provision for
attaching a Handset. A handset with spring cord is supplied by Matrix and is to be connected to the handset jack
(RJ12) on the Dongle.
Headset connectivity
EONSOFT supports headset connectivity, providing a MIC and a Speaker interface. Any stereo Headset of
standard make, with dual connectors can be connected to the MIC and the Speaker on the Dongle.
The headset connection allows speech in hands-free mode. The headset with either RJ11 or CASIO jack both are
supported by EONSOFT.
COM Port
The COM port connects EONSOFT to a computer (COM Port).
After EONSOFT has been successfully installed on a computer and the DKP parameters have been configured,
each time you open EONSOFT, the display and keypad of the phone will appear on your computer screen.
To Next Page
Loading...
