Matrix ETERNITY NE - SMDR Storage

Matrix ETERNITY NE System Manual 145
1. Click [+] to expand options.
2. In the field DDI Number for SIP Trunk 1, enter the DDI number you want to assign to this SIP extension
from among the DDI numbers provided by the ITSP with whom you have registered SIP Trunk 1.
3. In the field DDI Number for SIP Trunk 2, enter the DDI number you want to assign to this SIP extension
from among the DDI numbers provided by the ITSP with whom you have registered SIP Trunk 2.
4. In the field DDI Number for SIP Trunk 3, enter the DDI number you want to assign to this SIP extension
from among the DDI numbers provided by the ITSP with whom you have registered SIP Trunk 3.
5. In the field DDI Number for SIP Trunk 4, enter the DDI number you want to assign to this SIP extension
from among the DDI numbers provided by the ITSP with whom you have registered SIP Trunk 4.
6. To allow the system to land incoming calls with the same DDI number on this SIP extension, keep Allow
Incoming DDI Calls enabled. Default: Enabled.
Clear check box only if you want to disable.
7. To allow the system to send the DDI number as CLI when outgoing calls are made from this SIP extension,
keep Send DDI Number as CLI enabled. Default: Enabled.
If you clear the check box, the system will send the MSN number as CLI of outgoing calls made from this
extension.
SMDR Storage
The Station Message Detail Recording (SMDR) feature of ETERNITY enables you to record the details of Internal,
Incoming (IC) and Outgoing (OG) calls made from/to all its extensions. To obtain SMDR as a report, you must
enable SMDR Storage, and set filters. See “Station Message Detail Recording (SMDR)” to know more.
1. Click [+] SMDR Storage to expand options.
2. Select the type of internal calls to be stored from the combo box Store Internal Calls. You can select from
the following options:
• Made by/made to this extension (the system will store all calls made to and from this extension).
• If made by this extension (the system will store outgoing calls made from this extension)
• If made to this extension (the system will store only incoming calls from other extensions)
• Never (the system will not store internal calls)
3. To store details of incoming calls from external numbers, select Store Incoming Calls. Default: selected.
4. To store details of outgoing calls made by the extension user to external numbers, select Store Outgoing
Calls. Default: selected.