Matrix ETERNITY NE - Resetting Call Budget on Trunks

Matrix ETERNITY NE System Manual 379
• This feature works independent of any Call Accounting Software (CAS) installed with the ETERNITY.
• The ETERNITY will calculate cost of phone calls made by the trunks even when no call budget is
allocated
16
.
How to configure
Call Budget on Trunks is to be programmed in the Trunk Parameters of the trunk type on which you want to enable
this feature. For instructions, see “CO Trunks”, “Mobile Trunks” and “SIP Trunks” under Basic Settings.
• The consumed Call Budget on trunk can be reset from the System Engineer mode as well as the
System Administrator mode manually at any time, referred to as Manual Reset.
Resetting Call Budget on Trunks
The consumed Call Budget can be reset manually, i.e. anytime, as required/desired, or on a scheduled date either
daily or on a particular date of the month.
To reset the Call Budget on trunks, from the System Engineer mode,
• Open Jeeves.
• Log in as System Engineer.
• Click the Administration link.
• Click the Status link under Administration.
• To reset Call Budget on CO Trunks, click CO Status link to open the page.
If you have set Call Budget to reset on a scheduled date, the date will appear in the Budget Reset
Schedule (Date) field.
16. Based on the feature 'Call Cost Calculation'.