Matrix ETERNITY NE System Manual 541
Dialed Number Directory
What's this?
Dialed Number Directory is a Digital Key Phone/Extended IP Phone feature.
It is the list of numbers dialed out from the DKP/Extended IP Phone, similar to the call history of recently dialed calls
on a cell phone.
ETERNITY retains up to 16 numbers dialed out from a DKP/Extended IP Phone in a directory.
These numbers may have been dialed out using features like Abbreviated Dialing, Quick Dial, Redial, Walk-In
Class of Service, or may be a simple outgoing call made by directly dialing the external number.
How it works
• When a DKP/Extended IP Phone extension user makes an outgoing external call, the number is stored in
the Redial Number List.
• The list has a capacity of storing a maximum of 16 recently dialed numbers.
• The list is updated using the First-In First-Out logic, whereby the earliest dialed number is replaced with
the most recently dialed number.
• To use this feature, the DKP/Extended IP Phone user must invoke the “Last Number Redial” feature.
• Doing so, the Redial Number List will appear on the phone display.
• The user may now navigate the list, select the number to be dialed out.
• The system will dial out the selected number using the same Outgoing Trunk used to place this call earlier.
• If the number had been dialed earlier using Abbreviated Dialing, the system will check for Toll Control
when dialing out the number again from the dialed number directory
40
.
How to configure
No specific programming required.
How to use
For EON & Extended IP Phone Users Only!
• Press DSS Key assigned to Redial function.
OR
Dial 7
40. Recall that the system does not check for Toll Control when Abbreviated Dialing is used.
To Next Page
Loading...
