168 Matrix ETERNITY NE System Manual
Call Pickup Group
The Call Pickup (CPU) feature of ETERNITY NE allows extension users to answer (internal and trunk) calls ringing
on other extensions from their own extension; without physically going to the ringing extensions. For this extensions
must be assigned to CPU Groups.
See “Call Pickup” to know more about this feature.
You can create as many as 8 CPU Groups, and assign the extensions to these groups.
To create a CPU group,
1. Click the Call Pickup Group link.
2. For the desired Call Pickup Group Number, Double click to Select Extensions field.
A multiple selection box opens. The extensions appear on the left, with names and numbers, as
configured. If you have not configured names and numbers, the extensions will appear with their default
access codes and extension numbers.
If you have enabled On-Site Configuration, only those extensions that are connected will appear.
3. Select the extensions which are to be assigned to the CPU Group. These may be SLT, DKP or SIP
extensions.
Place your cursor on the desired extension and click the Select>> button.
Or
Press the ctrl key and click the left mouse button to select multiple extensions.
You can also delete extensions from the ones you have selected using the Delete key of your keyboard.
4. Click OK.
All the extension numbers you selected will appear in the field Select Extensions for the CPU Group
number. The extension numbers appear in the sequence you selected, separated by commas.
5. To create another CPU group, Double click to select field against the desired group number (02 to 08).
To Next Page
Loading...
