216 Matrix ETERNITY NE System Manual
3. Enter the SIP ID for the trunk.
This is the ID which remote parties will use to call this SIP Trunk. The SIP ID may be a number or text
consisting of a maximum of 40 characters.
If you have defined the trunk mode as Proxy, enter the User ID provided by your ITSP. For example, if SIP
URI provided by the ITSP is 12345@abc.com, enter 12345 in this field.
If you have defined the trunk mode as Peer-to-Peer, enter the desired User ID.
4. If you selected Peer-to-Peer as the SIP trunk mode, you may configure the trunk to Treat Incoming Peer-
to-Peer call as: Trunk or Station.
If you select Trunk, the Route Incoming call routing configured for the SIP trunk will be applied.
If you select Station, the incoming call on the trunk will be routed to the Extension Number received in the
“To:” field in the INVITE message.
If a Trunk Access Code and External Number are received in the ‘To:” field of the INVITE message, the
call will be dialed out using the outgoing trunks you configure in Select Trunks for Outgoing Calls.
If you select Station, you may also configure the parameters Class of Service, Caller ID on Call
Transfer, Toll Control and Select Trunks for Outgoing Calls.
Proxy/Registrar Parameters
If you have defined the SIP trunk mode as Proxy, configure the Proxy/Registrar Server parameters.
1. Enter the Proxy/Registrar Server Address and the Registrar Server Port provided by your ITSP.
The Registrar Server Address can be an IP Address or domain.
The Registrar Server Listening Port ranges from 1024 to 65535. Default: 05060.
2. Enter the authentication ID (user ID) provided by your ITSP in the field Authentication ID.
3. Enter the password provided by your ITSP for the Authentication ID in the field Authentication Password.
Outbound Proxy
If your ITSP (for this SIP trunk) has a SIP outbound server to handle voice calls, configure outbound proxy settings.
1. Select the check box Enable Outbound Proxy. Default: disabled.
2. Enter the IP address or domain name of the outbound proxy server and the server port address in the field
Outbound Proxy Server Address: Port. The default server port address is 05060.
3. Set the Re-registration Timer. This is the time period after which the ETERNITY NE will send registration
request to maintain registration binding with the Registrar server
62
.
62. The Registrar Server deletes an entry of its client from its database on expiry of a fixed timer. This timer is set by the Registrar
Server. The Re-registration Timer of ETERNITY enables it to send a registration request before the Timer of the Registrar Server
expires to remain registered on the Server.
To Next Page
Loading...
