Matrix ETERNITY NE System Manual 71
Each time there is a conflict of access codes, you will get an alert to inform you of the conflict and prompts
you to resolve the conflicting numbers.
3. You must resolve the conflict. Jeeves will not allow you to continue if you do not resolve conflict.
If you want to change the Feature Access Code that is conflicting with the extension number you have
assigned, go to Advanced Settings and change the Feature Access Code.
4. Assign names to extensions. The name you assign may be the name of the person who will use the
extension. Extension names may consist of a maximum of 18 characters.
This page displays only those extension ports available in the system and the number of ports you have
defined as Number of Ports Used in the Pre-requisites page.
SIP Extensions are a licensed feature.
In the case of SIP Extensions, the number you configure as Extension Number will be considered as the
SIP ID, the Authentication ID and the Authentication Password.
5. If you have finished assigning numbers and names, click Submit button.
To assign the extension numbers and names all over again, click the Clear Button on this page.
To default all extension numbers, click the Default button on this page.
6. Reassign Feature Access Codes, if required. The new access code may be a single digit or a sequence of
a maximum of 6 digits. Digits 0 to 9,# and * are allowed.
7. Click Submit to save changes.
To Next Page
Loading...
