Matrix ETERNITY NE System Manual 237
More Features
Priority
Each trunk of the ETERNITY NE can be assigned a Priority Level starting from 1, 2, 3... to 9, with '1' being lowest
Priority and '9' being highest Priority. Whenever there are incoming calls on multiple trunks, the call on the trunk
with higher priority will be answered by the Operator extension first. To know more, see “Priority”.
1. Select a Priority level from 1 to 9 for the trunk. Default: 9.
Time Table
Select a Time Table for the SIP trunk. Default: System Time Table.
If you have not configured Time Table, you may do so now,
• Clicking the arrow icon.
• The Time Table page opens.
• Define the working days, and the start and end time of the working hours for each working day.
• Click Submit.
• Close the window.
See “Time Tables” to know more.
Forced Account Code
Configure this parameter if you want to apply the Forced Account Code feature on the SIP trunk. See “Account
Codes” to know more about this feature.
1. Select the check box Do not allow Outgoing Calls without Account Code to enable Forced Account
code on the trunk. Default: Disabled.
When you enable this flag, the system will prompt extension users to dial the Account Code whenever they
grab this trunk to dial out a number. The system will allow extension users to dial out numbers only after
they have dialed the Account Code or Name.
Account Codes feature must also be enabled in the Class of Service of extension users who are to be
allowed this feature.
Now that you have finished configuring the SIP trunk. You may configure the next SIP trunk.
1. Click the tab of the next SIP trunk number.
2. Follow the same steps as described above to configure this trunk.
3. Use the Copy button to apply the same SIP trunk settings you configured on this trunk.
To Next Page
Loading...
