Matrix ETERNITY NE - Page 135

Matrix ETERNITY NE System Manual 125
• Enable Call Taping for Outgoing Calls. Type the external numbers that you want the system to
tape. You may type as many as 99 numbers.
• Select the check box Tape Calls without CLI? if you want incoming calls without CLI to be taped.
Default: Disabled.
• Select the check box Call Taping for Internal Calls, if you want internal calls made and received
by the extension to be taped.
• Click Submit to save the Profile.
• Close the window by clicking [x] on the top-right corner of the window.
See “Call Taping” to know more.
Call Duration Control
To enable the “Call Duration Control (CDC)” feature on the extension,
1. Click [+] Call Duration Control to expand options.
2. Select the type of Call Duration Control to be applied from the options:
•OFF
• Apply as per profile 1
• Apply as per profile 2
• Apply as per profile 3
• Apply as per profile 4
If you do not want to apply Call Duration Control, select OFF.
Default: OFF.
3. Configure the Call Duration Control Profile number you selected for the extension. To do this,
• Click the settings button. The page opens in a new window. The page displays the parameters of the
profile you selected for the extension.
• In the new window,
• Enable Apply CDC to Internal Calls, if CDC is to be applied on internal calls. Default: Disabled.
• Enable Apply CDC for Incoming Calls received from trunks, if CDC is to be applied on incoming
external calls. Default: Disabled.
• Enable Apply CDC for Outgoing Calls, if CDC is to be applied to outgoing external calls. Default:
Disabled.
• If required, change the CDC Timer to the desired duration. The range of the timer is 0001 to 9999
seconds. Default: 160 seconds.
• Enable Disconnect Call after CDC Timer check box if you want calls to be disconnected on the expiry
of the CDC Timer. Default: Disabled.
• In the Apply CDC for calls matching with numbers column, type the external numbers on which you
want to apply CDC. You can enter as many as 99 numbers.