Matrix ETERNITY NE - Page 159

Matrix ETERNITY NE System Manual 149
5. Select the appropriate Registrar Server IP Address to register the IP phone with the SIP Registrar of
ETERNITY NE, according to your installation scenario:
• If the Extended IP phone is in the same network (LAN) as ETERNITY NE, select Use Ethernet IP
Address as Registrar Server IP Address.
• If the Extended IP phone is in the Global Network and ETERNITY NE is connected to Internet over
Mobile WAN, select Use Mobile Port IP Address as Registrar Server IP Address.
• If the Extended IP Phone is connected to the Global Network and ETERNITY NE is located behind a
Router, select Use Router/STUN's IP Address as Registrar Server IP Address.
Make sure the Router’s Public IP Address is configured in the Network Parameters.
• If the Extended IP Phone is connected in the Global Network and ETERNITY NE is located behind a
NAT Router, and STUN is programmed, select Use Router/STUN's IP Address as Registrar Server IP
Address.
• If Dynamic DNS is configured in the Network Parameters, select Use Dynamic DNS Host Name as
Registrar Server IP Address.
6. To set the call progress tone generation standards of the country where the Matrix IP Phone is installed,
select the Call Progress Tone - Region. Default: Region 1.
See “Call Progress Tones” to know more.
7. Select the desired Dial Tone Type from the combo box: Type 1 or Type 2. Default: Type 1.
See“Call Progress Tones” to know more.
8. Select the region/country whose Date and Time settings the IP Phone should follow. Default: India.
9. If you want to enable Daylight Saving Time (DST) on the phone, set Apply DST? to Yes. Default: No.
The Daylight Saving Time convention followed in the country/region you selected will be automatically
applied. The IP phone will change its date and time settings according to the DST convention of the
selected country/region.
10. Select the CO CLIP Pattern for the IP phone. This is the type of Calling Line Presentation on the phone for
incoming calls from trunks. You can select any of these options:
• Name Only (only the name of the caller will be displayed).
• Number Only (only the number of the caller will be displayed).
• Number + Name (both the name and the number of the caller will be displayed).
Default: Number + Name.
11. Select the Language for the IP phone. Default: English.
ETERNITY NE provides language support for English, French, German, Spanish, Portuguese, and Italian
on the Matrix IP Phone. When you select any of these languages, all the prompts and command strings
will appear in the selected language.