160 Matrix ETERNITY NE System Manual
• Enable Apply CDC to Internal Calls, if CDC is to be applied on internal calls. Default: Disabled.
• Enable Apply CDC for Incoming Calls received from trunks, if CDC is to be applied on incoming
external calls. Default: Disabled.
• Enable Apply CDC for Outgoing Calls, if CDC is to be applied to outgoing external calls. Default:
Disabled.
• If required, change the CDC Timer to the desired duration. The range of the timer is 0001 to 9999
seconds. Default: 160 seconds.
• Enable Disconnect Call after CDC Timer check box if you want calls to be disconnected on the expiry
of the CDC Timer. Default: Disabled.
• In the Apply CDC for calls matching with numbers column, type the external numbers on which you
want to apply CDC. You can enter as many as 99 numbers.
• In the Do Not Apply CDC for calls matching with numbers column, enter the numbers which you
want to be exempt from CDC.
• Click Submit and close the window.
Priority
Each extension of the ETERNITY is assigned a Priority Level starting from 1, 2, 3... to 9, with '1' being lowest
Priority and '9' being highest Priority. Whenever an extension (phone) with higher priority calls an extension with
lower priority, a triple ring is placed on the called extension. To know more, read the feature description “Priority”.
1. Select a Priority from 1 to 9 for the SIP extension. Default: 5.
If this SIP extension is assigned to Operator, you may want to set a higher priority for this extension.
Personal Directory
1. Select a Personal Directory number from 01 to 50 that you want to assign to the SIP extension. Default:
None.
A Personal Directory is a list of 25 frequently dialed numbers, each of which are stored by Index number
(location code), Name and Trunk Access Codes (). The Personal Directory is necessary for using the
features “Abbreviated Dialing” and “Dial By Name”.
When a Personal Directory is assigned to an SIP, it must also be configured. The Personal Directory can
be configured also by the extension user. Refer the topic “Abbreviated Dialing” for instructions on
configuring the Personal Directory.
Time Table
1. Select a Time Table for the SIP extension. Default: System Time Table.
If you have not configured Time Table, you may do so now, by clicking the Time Table link. Define the
working days, and the start and end time of the working hours for each working day.
See “Time Tables” to know more.
To Next Page
Loading...
