166 Matrix ETERNITY NE System Manual
• Click OK. All the extensions you selected will appear in the Extension field, in the sequence you
selected, separated by commas.
5. To configure external number, enter the desired destination number in the External Number field.
6. If you selected Route Door Phone Calls – As per Schedule, select the destination you want to Route
Door Phone Calls during Day to. The destination may be Extensions or External Number. Default:
Extensions.
• If you selected Extensions as the landing destination for door phone calls during the day, double click
the field Extensions for Day.
Follow the same instructions as above for selecting extensions.
• If you selected External Number, as the landing destination for door phone calls during the night, enter
the destination number in the External Number field.
7. Select the destination you want to Route Door Phone Calls during Night to. You may select Extension
or External Number, as desired. Default: Extensions.
• If you selected Extensions as the landing destination for door phone calls at night, double click the
field Extensions for Night.
• Follow the same instructions as above for selecting extensions.
• If you selected External Number, as the landing destination for door phone calls at night, enter the
destination number in the External Number field.
The External Number is the same for Day time and Night Time, which means, you can have calls routed to
one external number only.
8. For the External number you have entered as landing destination for (At Wish and Scheduled) door phone
call route, define the outgoing trunk in the field To dial External No., Use trunk.
• Double click the field To dial External No., Use trunk
A multiple selection box opens. On the left, the trunks appear with their names (if configured in “Naming
Trunks”) and port numbers in a sequence, starting with CO trunks, followed by Mobile trunks and SIP
trunks
43
.
• To select a trunk, place your cursor on the desired trunk, and click the Select>> button.
Or
• Press the ctrl key and click the left mouse button to select multiple trunks.
To change the sequence of the trunks you selected, use the Up and Down arrow buttons on the right
display box.
To delete trunks from the ones you have selected use Delete key on your keyboard.
• Enable Rotation if you have selected more than one trunk. Default: Disabled.
43. If you have not assigned any names to the trunks, they will appear with their default names (CO MOB, SIP) and port numbers. If
you have enabled On-Site Configuration, only those trunks that are connected will appear in the box.
To Next Page
Loading...
