188 Matrix ETERNITY NE System Manual
• You can also set the Rx and Tx Gains for SIP to Digital Trunks and Extensions and SIP to SLT.
• To increase Rx and Tx Gain for SIP to SLT extensions, go to SLT parameters page. To increase Rx
and Tx Gain for Digital Trunks/Extensions, go to “SIP Trunks” parameters page.
25. Click Submit to save your CO port settings.
More Features
Click More... link to expand.
Priority
Each trunk of the ETERNITY NE can be assigned a Priority Level starting from 1, 2, 3... to 9, with '1' being lowest
Priority and '9' being highest Priority. Whenever there are incoming calls on multiple trunks, the call on the trunk
with higher priority will be answered by the Operator extension first. To know more, see “Priority”.
1. Select a Priority level from 1 to 9 for the trunk. Default: 9.
Time Table
1. Select a Time Table for the CO trunk. Default: System Time Table.
If you have not configured Time Table, you may do so now, by clicking the Time Table link. Define the
working days, and the start and end time of the working hours for each working day.
See “Time Tables” to know more.
Forced Account Code
Configure this parameter if you want to apply the Forced Account Code feature on the trunk. See “Account Codes”
to know more about this feature.
1. Select the check box Do not allow Outgoing Calls without Account Code to enable Forced Account
code on the trunk. Default: Disabled.
When you enable this flag, the system will prompt extension users to dial the Account Code whenever they
grab this trunk to dial out a number. The system will allow extension users to dial out numbers only after
they have dialed the Account Code or Name.
Account Codes feature must also be enabled in the Class of Service of extension users who are to be
allowed this feature.
To Next Page
Loading...
