204 Matrix ETERNITY NE System Manual
1. Click [+] DTMF Out Dial to expand.
•Set DTMF ON Time to the desired value. Default: 100ms
DTMF ON Time is the time for which the DTMF digit will remain ON when being dialed out by the
ETERNITY. DTMF ON Time finds its application in the feature “Multi-Stage Dialing”.
• Set the
Pause Time between successive DTMF digits. Default: 1 second.
The Pause Time provides the delay in number dialing from the mobile port. The Pause Time will be
applicable when the digit 'P' is configured in the DTMF number string which is to be out dialed as DTMF
digits on the Mobile port.
For example, if PPP2 is to be out dialed and Pause timer is configured as 3 seconds, the ETERNITY
will out dial the digit 2 after 9 seconds, i.e. after a delay of individual P i.e. 3+3+3 =9. The range of this
time is from 1 to 9. The Pause Time is used in the “Multi-Stage Dialing” feature.
More Features
Click More... link to expand.
Priority
1. Select a Priority level from 1 to 9 for the trunk. Default: 9.
Each trunk of the ETERNITY NE can be assigned a Priority Level starting from 1, 2, 3... to 9, with '1' being
lowest Priority and '9' being highest Priority. Whenever there are incoming calls on multiple trunks, the call
on the trunk with higher priority will be answered by the Operator extension first. To know more, see
“Priority”.
Time Table
1. Select a Time Table for the Mobile trunk. Default: System Time Table.
If you have not configured Time Table, you may do so now,
• Clicking the arrow icon.
• The Time Table page opens.
• Define the working days, and the start and end time of the working hours for each working day.
To Next Page
Loading...
