Matrix ETERNITY NE System Manual 347
• matches the dialed number '952652630555' with those in the Dialed Number List applied to the
outgoing trunks of Extension A. As a match is found, the system
• checks for the corresponding Substitute Number strings.
• substitutes '95' with '91'
• dials out the number as '912652630555' from the Mobile port 1.
Automatic Number Translation also forms the basis of “Multi-Stage Dialing”.
How to configure
The working of the Automatic Number Translation feature is controlled by two parameters: 'Automatic Number
Translation Table' and 'Automatic Number Translation flag' in the outgoing trunks.
You must first configure the Dialed Number strings and the Substitute Number strings in the Automatic Number
Translation Table, and assign the configured Table to the trunks, on which you want to enable this feature.
Decide the number of ANT tables you need to configure. You can configure 8 different ANT Tables, with a
maximum of 32 number strings in each.
For your convenience, draw three-column tables on paper. In each table, enter the Index numbers 1 to 32 in the
first column, Dialed Number in the second column, and Substitute Number in the third column.
Enter the Dialed Numbers and their corresponding Substitute Numbers against each Index number. For instance, if
you entered '95' as the Dialed Number at Index 1 and its Substitute Number string '91' must be entered at Index 1.
Decide which of the trunks are to be assigned the Automatic Number Translation feature and configure Automatic
Number Translation on those trunks.
To configure Automatic Number Translation,
• Open Jeeves.
• Log in as System Engineer.
• Click the Advanced Settings link.
To Next Page
Loading...
