Matrix ETERNITY NE System Manual 449
• To configure another Call Taping Profile, click the desired Profile number tab. Follow the same instructions
as above to configure the Call Taping Profile.
• Now, assign the Call Taping Profile(s) you configured to the desired extension types. For instructions on
configuring Call Taping on different extension types, see “SLT Extensions”, “DKP Extensions”, “SIP
Extensions” under Basic Settings.
• To assign a mailbox for Call Taping, click the System Parameters link. The System Parameters page
opens.
• On this page, under System Parameters, go to Mailbox for Call Taping, select the Extension Type—SLT,
DKP, SIP—whose mailbox you want to use for Call Taping from the drop down list, and enter the Port
Number of this extension. For example, if you want to select the mailbox of the phone connected to SLT
Extension Port 4, enter 4 in this field.
For SLT extensions, the valid Port numbers are 1 to 14. For DKP extensions, the valid Port numbers are 1
and 2. For SIP Extensions, the valid Port numbers are 1 to 16.
• If required, you may disable the Beeps played when Call Taping starts by clearing the Play Beep when
Call Taping/ Conversation Recording starts check box on this page.
• Click Submit to save changes.
To Next Page
Loading...
