462 Matrix ETERNITY NE System Manual
CLIP and Caller ID Presentation on Call Transfer will work only if CLIR is not enabled on the extension that
has transferred the call. Refer the topic “Calling Line Identity Restriction (CLIR)”.
How to configure
The functioning of this feature is controlled by two parameters: CLIP Type and Caller ID on Call Transfer.
If you want to replace '+' characters received as CLI on telephones that do not support CLI prefixed with this
character, you may configure the Replace ‘+’ from CLI option in the “System Parameters”.
If SLTs supporting CLI are connected to the ETERNITY, you must select a signaling protocol for CLI for the SLT
extensions. TMF is selected as CLIP Type for all SLT extensions.
To select CLIP type for SLT extensions,
• Open Jeeves.
• Log in as System Engineer.
• Click the Basic Settings link.
• Click the SLT Extensions link. The page of the first SLT extension opens. Click more.
• Click Hardware Settings to expand.
To Next Page
Loading...
