494 Matrix ETERNITY NE System Manual
If extension users are to be allowed to initiate or join the Multi-party Conference from a remote location, “Direct
Inward System Access (DISA)” must be enabled on the trunk on which they call.
How to use
For EON and Extended IP Phone Users
To initiate multiparty conference:
• Dial the number of party 1.
• When you are in speech with party 1, dial Hold-191.
• Party 1 is included in the conference. You get confirmation tone.
• Dial number of party 2.
• When you are in speech with party 2, dial Hold-191.
• Party 2 is included in the conference. You get confirmation tone.
• Dial the number of party 3.
• When you are in speech with Party 3, dial Hold-191
• Repeat these steps to include as many parties as desired (max. 6).
• Press the DSS key assigned to 'Multiparty Conference'.
OR
• Dial 191
• You get included in the conference.
To cancel a Multiparty Conference:
• Go ON-Hook.
• Go OFF-Hook
• Dial 190.
To remove a party from Conference:
• Go ON-Hook, while in active conference.
• Go OFF-Hook
• Dial 192.
• Scroll to select the Party to be removed.
• Press Enter key.
To withdraw from Conference:
• Go ON-Hook
• Go OFF-Hook
• Dial 193.
For SLT Users
• Lift handset.
• Dial number of party 1.
• Speech with party 1.
• Dial Flash-191.
• Dial number of party 2.
• Dial Flash 191.
• Repeat the steps to include the desired number of parties (max. 6).
• Dial 191.
• You get included in the conference.
To Next Page
Loading...
