Matrix ETERNITY NE System Manual 43
• The phone will start loading the Extended IP Phone Firmware. It will display current firmware being loaded.
• After loading the firmware, the phone will prompt you to change Network settings.
• Press Enter key to select ‘No’ or wait for three seconds.
If you want to change the Network Settings, you may select ‘Yes’, by moving the cursor to Yes with the Up
key and pressing the Enter key.
• The phone makes DHCP Discovery and fetches its IP Address and Server IP Address from the ETERNITY
NE.
On getting the IP Address, the phone initiates Auto Configuration to download the configuration files from
ETERNITY NE.
To Next Page
Loading...
