Matrix ETERNITY NE System Manual 571
To configure the DISA CLI Authentication Table,
• Make a list of remote users and their numbers whom you want to allow DISA.
• For each remote user’s number on your list, write the Extension number of the ETERNITY NE you want to
allow this extension user to log in.
• Open Jeeves.
• Log in as System Engineer.
• Click the Advanced Settings link.
• Click the DISA - CLI Authentication link. The CLI Authentication Table page opens.
• You can configure as many as 999 numbers in this table, by clicking the tabs of the index on the top of the
table.
• Refer to the list of remote user numbers and the corresponding ETERNITY extension numbers you made.
• In the Calling Party’s Number column, enter the number of the remote users whom you want to allow
access to DISA using CLI Authentication. The system will match the CLI of the callers with the numbers
you store here.
To Next Page
Loading...
