Matrix ETERNITY NE - Page 590

580 Matrix ETERNITY NE System Manual
03 for Short Long
04 for Short Very Slow
05 for Long Fast
06 for Long Slow
07 for Very Long Slow
08 for Double
09 for Triple
• After dialing the desired Ring Pattern Code,
• Press 'Enter' key.
• You get the prompt 'Go Idle for Ring' on your phone display.
•Go Idle.
• The Ring Pattern you selected will be played.
• You may repeat the SE commands to demonstrate another Ring Pattern.
• Exit SE mode.
For SLT Users
• Enter SE mode.
• Dial command 4003-Ring Pattern
Where,
Ring Pattern is
01 for Continuous
02 for Short Fast
03 for Short Long
04 for Short Very Slow
05 for Long Fast
06 for Long Slow
07 for Very Long Slow
08 for Double
09 for Triple
• Go Idle, after dialing the desired Ring Pattern Code.
• The Ring Pattern you selected will be played.
• You may repeat the SE commands to demonstrate another Ring Pattern.
• Exit SE mode.