Matrix ETERNITY NE - Page 631

Matrix ETERNITY NE System Manual 621
Now, program these parameters:
• Enable Incoming CLI Nomalization: Enable this flag if you want to use the Incoming CLI Modification
feature. By default, this flag is disabled.
If you receive CLI in dialable format, there is no need to use this feature. In such case, keep the flag
disabled. You do not need to program any of the CLI Nomalization parameters.
• Country Code: Enter the Country Code of the country where ETERNITY is installed. The Country Code
helps ETERNITY detect whether the Incoming CLI received is a national or an international number. Do
not enter any prefix for the Country Code. For example, if your ETERNITY is installed in USA, enter only ‘1’
as the Country Code. Do not enter ‘+’ or “00’ as prefix to the country code ‘1’. By default the Country Code
is ‘91’ (India).
•Area Code: Enter the Area Code of the place where the ETERNITY is installed. The Area Code helps
ETERNITY detect whether the Incoming CLI received is a local number. Do not enter any prefix for the
Area Code. For example, if you want to enter Area Code for Mumbai, enter only ‘22’. Do not enter the
prefix ‘0’ to the area code. By default, Area Code is ‘265’ (Vadodara city).