662 Matrix ETERNITY NE System Manual
• When you assign a Macro to a DSS Key on a DKP or Extended IP Phone,
• you must select Macro as Function Type
•As Offset, you must select the Macro Index number (1-25) at which the number string is stored. In
this example, it would be Macro Index 1.
For detailed instructions on assigning a keyboard macro to a DSS key, see “Phone Key Settings” under
“DKP Extensions” for instructions. Also see, “Matrix Extended IP Phone Key Settings” under “SIP
Extensions”
• When creating a Macro for a special Key on an SLT,
• In the Number String field, enter the strings the system should consider as command when the special
key on the SLT is pressed.
•In the Access Codes field, enter the strings sent by the SLT on pressing the special function key.
For example, if the SLT sends the string ‘*53’ to the ETERNITY NE when the function key for Alarms is
pressed, enter the string 163 (the feature access code for Voice-guided Alarms) in the Number String
field, and enter the string *53 in the corresponding Access code field.
The Access Code that you assign here in Macros must not conflict with any other Access Codes in the
Dial Phase. See “Access Codes”.
• Click Submit to save.
• Log out of Jives.
To Next Page
Loading...
