Matrix ETERNITY NE - Page 689

Matrix ETERNITY NE System Manual 679
• The Automatic Number Translation table would look like this:
• When the Automatic Number Translation table is configured, the Extension user can simply dial the Trunk
Access code and the destination number: 0/5/61/62/63/64 - 0014125126508.
• The system matches the dialed number with the Dialed Number String of the ANT table, the number
matches with the entry ‘00’ stored in the table.
• The system dials the Substitute Number string 1602233. It waits for the calling card server to answer the
call.
• When the call is matured, i.e. the calling card server has answered the call, the system dials the PIN
number 1132121234 and waits for the Pause Timer before dialing the destination ‘00’.
Thus, the extension user directly dials only the desired destination number, the system substitutes this
number by adding the Calling Card server number and PIN number and dials these numbers in two stages.
How to configure
To be able to use Multi-Stage Dialing, you must configure the following:
• Automatic Number Translation table on the trunk you want to use this feature. For instructions on
configuring ANT on different Trunk types, see “CO Trunks”, “Mobile Trunks”, “SIP Trunks” under Basic
Settings.
Index Dialed Number String Substitute Number String
1 00 1602233W1132121234P00
2
3
4
5
6
:
32