78 Matrix ETERNITY NE System Manual
7. Click OK. All the extension numbers you selected will appear in the field Operator Extension/s for the
Day. The extension numbers appear in the sequence you selected, separated by commas.
8. Repeat the same steps to select Operator Extension/s for Night.
9. Click Submit.
For each extension you have selected as Operator for the Day and Night,
• define the Class of Service
11
for the Day and for Night.
• set Toll Control
12
for the Day and for Night.
• select Outgoing Trunks
13
for the Day and for Night.
• set Priority
14
for the Operator extension for the Day and for Night.
You can set Class of Service, Toll Control, Outgoing Trunks and Priority for the Operator extension(s)
when you configure the parameters of different extension types: SLT, DKP and SIP Extensions.
11. These are features allowed/denied to the Operator extension.
12. The type of calls to be allowed/denied to the Operator extension during the day and at night: local calls, regional calls, national
calls, international calls, limited calls.
13. The trunks through which outgoing calls are to be routed during the day and night.
14. Each extension of the ETERNITY is assigned a Priority Level starting from 1, 2, 3, 4...to 9. With 1 being the lowest priority and 9
being the highest priority. The calls from an extension with higher priority has preference in call landing. When an extension with
higher priority calls another with lower priority, a triple ring is placed on the called extension, and the call will land first on the exten-
sion when there are multiple incoming calls on the extension with lower priority.
To Next Page
Loading...
