Matrix ETERNITY NE System Manual 925
• Firmware Version of Engine: This shows the firmware version of the mobile Engine.
• SIM ID: This is the Integrated Circuit Card ID (ICC-ID) of the SIM Card inserted in the Mobile port. Each
SIM is internationally identified by its ICC-ID. ICC-IDs are stored in the SIM Card and are also printed
on the SIM card body.
• IMSI: International Mobile Subscriber Identity (IMSI) is a unique number stored in the SIM card.
• Registered with Network: This shows the type of network with which the Mobile port is registered,
whether GSM, GSM Compact, 3G or UMTS.
• Network Operator Code: This is the MCC-MNC code of the network with which the mobile port is
registered.
• Network Operator Name: This is the name of the service provider/network operator with which the
Mobile Port is registered.
• Signal Strength (dBm): This is the signal strength in '-dBm' as received from the network with which
the Mobile port is registered.
• Bit Error Rate (BER): BER is Bit Error Rate which defines the quality of the channel.
• Cell ID: This is the 16-bit identifier that identifies the cell. The cell is the radio coverage area given by
one BTS (Base Transceiver Station).
• Location Area Code (LAC): The LA (Location Area) is a group of cells defined by the Operator. The
LAC (Location Area Code) uniquely identifies a LA within a PLMN (Public Land Mobile Network).
• Call Duration: This is the total call duration of matured outgoing calls
74
on the Mobile port. This data is
used for calculating Answer Seizure Ratio (ASR) for the port. It is displayed in MMMMMM:SS format.
• Call Budget Type: This shows the Call Budget Type, i.e. whether Amount, Minutes or Number of
Calls, set on the Mobile port.
• Allotted Amount (Rs.) / Minutes/Calls: This shows the sum/number of minutes/number of calls
allotted as Call Budget on the Mobile port.
• Consumed Amount (Rs.) / Minutes/Calls: This shows the sum/number of minutes/number of calls of
the allotted Call Budget that has been used up on the Mobile port.
• Call Budget Reset Mode: This shows the whether manual or scheduled reset of the consumed call
budget is set on the Mobile port.
• Call Budget Reset Schedule (Date): This shows whether the consumed Call Budget on the Mobile
port is to be reset Daily or on a particular date of a month.
• Reset Consumed Amount/Minutes/Calls: This editable field allows the System Engineer to reset the
consumed Call Budget Amount/Minutes/Calls at any time, manually.
74. Matured calls are outgoing calls for which 'CONNECT' message was received from the network.
To Next Page
Loading...
