86 Matrix ETERNITY NE System Manual
If you want voice message to be played as message wait notification, record and assign a Voice
Module. See “Voice Message Applications” for instructions.
ETERNITY can play only 4 Voice Modules simultaneously. The Voice Module for Message Wait Notification
will not be played if there are already 4 being played simultaneously. In which case, Stuttered Dial Tone will
be played for Message Wait Notification, when the extension user goes OFF-Hook.
• LED Lamp: If the SLT has a 'Message Wait' lamp, you may select this option as Message Wait
Indication. The lamp will blink continuously and will be turned off when the extension user has
retrieved all the waiting messages.
• Ring: The extension will ring for the duration of the Message Wait Ring Timer (configurable;
default: 30 seconds), for as many times as the Message Wait Ring Count (configurable; default: 10
times), at the interval set as the Message Wait Ring Timer Interval (configurable; default: 30
minutes).
When the extension user answers the call, the VMS informs the user of the new message and
allows the extension user to access it.
See the feature description “Message Wait” to know more.
Default: LED Lamp.
9. To notify the extension user via e-mail about new messages in the mailbox, select the check box Voice
Mail Notification via E-mail.
• To mail the new voice message to the extension user as attachment, select With Attachment (.wav
file).
• To mail the notification only to the extension user, select Without Attachment.
Default: Without Attachment.
• Type the E-mail Address of the extension user to which the Voice Mail notification is to be sent. The e-
mail ID may consist of up to 64 characters. Default: blank.
10. To assign Department Group mailbox to the SLT extension, select the check box Assign Mail Box of
Department Group. Default: Disabled.
You can assign the Mailbox of a Department Group to SLT extensions, even to those SLT extensions that
are not included in the Department Group. See “Department Call”.
• Select the Department Group whose mailbox you want to assign to the extension from the combo box
Specify Department Group.
To Next Page
Loading...
