NEC Electra Elite IPK - Page 293

2 - 216 Memory Blocks
___________________________________________________________________________________
___________________________________________________________________________________
Document Revision 4 Electra Elite IPK
 Notes 
4-17
Station to Class of Service Feature Assignment
1. Sixteen Classes (00 ~ 15) of feature restriction patterns allow a station user to activate particular features while
restricting others.
2. At default, all stations are in Class 00.
3. Stations are assigned to a Class of Service in Memory Block 4-17 (Station to Class of Service Feature
Assignment).
4. LCR/ARS Bypass (Page 3, LK 4) applies only when the station is assigned to an LCR/ARS Class (1~4) in
Memory Block 4-40 (LCR Class Selection). LCR/ARS Bypass does not apply when using access codes to
directly access an ARS Table (functions 601~604 – ARS Tables 1~4) in Memory Blocks 1-1-46~48 [Access
Code (1/2/3-Digit) Assignment].
5. ARS Overflow (Page 6, LK 1) allows or restricts access to Trunk Group 01 when the first priority trunk group
(programmed route) is busy.
6. When the SLIB(4)-U( ) ETU is used, and a change is made to Pg 7 LK1 (Send Caller ID to SLT), reset may be
required for proper functionality.
Related Programming
M.B. Number Memory Block Name