NEC Electra Elite IPK - Page 422

Electra Elite IPK Document Revision 4
Programming Manual 2 - 345
___________________________________________________________________________________
___________________________________________________________________________________
 Notes 
1-15-13
Centralized Day/Night Switching for Remote Office Assignment
1-15-14
Centralized Day/Night Switching for Main Office Assignment
1-15-15
Centralized BLF Send Point Code Assignment
1-15-16
Centralized BLF Send Extension Number Assignment
1-15-17
Centralized BLF Send Time Assignment
1-15-18
Centralized BLF Display Extension Number Assignment
3-70
CIC Number Assignment
5-05
Common Signaling Channel Route Selection
1-1-05
Start Time Selection
1-5-02
SMDR Print Format
1-5-13
Printer Connected Selection
1-5-14
Printer Line Feed Control Selection
1-5-25
SMDR Valid Call Time Assignment
1-5-26
SMDR Incoming/Outgoing Print Selection
1-8-35
COM Port Baud Rate Setting Assignment
4-56
SMDR Telephone Print Selection
1. This Memory Block is required for the following K-CCIS features:
Centralized Billing - K-CCIS
Centralized Day/Night Mode Change - K-CCIS
Centralized BLF (K-CCIS)
2. Assigning a CCH i channel is used for IP (K-CCIS) feature.
Related Programming (Continued)
M.B. Number Memory Block Name