Electra Elite IPK Document Revision 4
Programming Manual 2 - 375
___________________________________________________________________________________
___________________________________________________________________________________
Notes
4-54
Enhanced 911 CESID to Station Table Assignment
4-62
ISDN-PRI Directory Number
1. Use this Memory Block for 911 outgoing calls from a remote office to select Station Number or CES-ID for Calling
Party Number information. When the main office is a NEAX2000 or Electra Elite IPK, this data is set to CES-ID.
When the main office is a NEAX2400, this data is set to Station Number.
2. This system data is used at remote offices only.
3. This Memory Block is used when the following K-CCIS features are used:
Centralized E911 – K-CCIS
Calling Party Number (CPN) Presentation from Station Information
4. Use Memory Block 4-54 (Enhanced 911 CESID to Station Table Assignment) to provide the CESID for 911 Calls.
5. Use Memory Block 4-62 (ISDN-PRI Directory Number) to provide The Calling Party Number (CPN) Presentation
from Station Information.
Related Programming (Continued)
M.B. Number Memory Block Name
To Next Page
Loading...
