NEC Electra Elite IPK - Page 56

Electra Elite IPK Document Revision 4
Programming Manual 1 - 23
___________________________________________________________________________________
___________________________________________________________________________________
LK 1 System Mode
LK 7 ESP
Data
No.
Memory Block Name Default Value Programming Values
00 Doorphone Assignment No default LK1~LK4 Assigns DPH1~DPH4 Yes or
No
01 Doorphone Display Time Selection 10s (R2500 or lower)
10s (R3000 or
higher)
10s, 30s, 60s, 90s (R2500 or lower)
01s~99s (R3000 or higher)
02 External Speaker Connection
Selection
All Speakers (A~C)
On
ESP A, ESP B, ESP C
03 External Paging Alert Tone
Selection
YS YS, NO
04 Doorphone Ring Pattern Selection DPH1~4 ON OFF, ON, A~H
05 Doorphone Ringing Frequency
Selection
C A~H
06 External Paging Timeout Selection 5.0 (R2500 or lower)
300s (R3000 or
higher)
In minutes: 0.5, 1.0, 1.5, 2.0, 3.0, 5.0,
8.0, ∞ (No Limit) (R2500 or lower)
000s (No Limit), 001s~999s (R3000 or
higher)
07 External Ring Relay Pattern
Selection
PT3 Refer to 1-7-07 External Ring Relay
Pattern Selection on page 2-202.
08 External Speaker Chime Selection PRT PRT (Normal paging tone before Page)
C-S (Chime Start Only)
C-B (Chime Start/End)
09 External Speaker Chime Start Time
Selection
700 In milliseconds: 000, 100, 200, 300,
400, 500, 600, 700, 800, 900, 1000,
1100, 1200, 1300, 1400, 1500