NEC Electra Elite IPK - Page 61

1 - 28 Multiline Terminal Programming
___________________________________________________________________________________
___________________________________________________________________________________
Document Revision 4 Electra Elite IPK
06 Call by Call Facility Coding Value
Assignment (Feature)
All RABs 00 00 Non-CBC RAB, None
05 5ESS Local Exchange
06 5ESS default-Common Carrier
07 Call by Call Service Parameter
Assignment
All RABs 0 - 000 0 (0 or 1) - 000 (000~127)
08 Call by Call Max Digit Assignment All RABs 00 00 (No Limit) ~ 24
09 Call by Call Simulated Facility
Group Assignment
All RABs 00 00 (None)~16
20 Call by Call Outgoing SFG
Assignment
99 01~16 For Electra Elite 48 (Default
16), 01~64For Electra Elite192 (Default
64)
99 Default for all SFGs
21 Call by Call Outgoing/Incoming
SFG Assignment
99 01~16 For Electra Elite 48 (Default
16),
01~64 For Electra Elite 192 (Default
64) 99 Default for all SFGs
22 Call by Call Incoming Type
Selection
DID CO, DID
LK 1 System Mode
LK 10 Call by Call (Continued)
Data
No.
Memory Block Name Default Value Programming Values