Xerox Phaser 6360 - Page 560

I – 8 Phaser 6300/6350/6360 Color Laser Printer Service Manual
No Paper Sensor, 2-40
location, 2-20
part number, 9-13
testing, A-17
No Toner Sensor, 2-14
connector location, 10-5
location, 2-21
part number, 9-31
removal, 8-88
wiring, 10-20
Non-contact Sensor, 2-37
photo-receptive, 2-18
photo-reflective, 2-18
Registration Sensor, 2-30
connector location, 10-7
location, 2-20
part number, 9-15
removal, 8-39
testing, A-17
Temp/Humidity Sensor, 2-40
location, 2-21
part number, 9-35
removal, 8-110
testing, A-17
thermistor, 2-18
Toner Cartridge In, 2-43
location, 2-21
removal, 8-90
testing, A-17
Toner Full Sensor, 2-13
connector location, 10-6
location, 2-21
part number, 9-21
removal, 8-73
testing, A-18
types, 2-18
Sensor Acutator Kit
contents
, 9-62
part number, 9-58
Serial Debug Port, 1-7
back channel trace, A-22
location, 1-7
operation, A-21
wiring, 10-27
serial number
location
, 9-2
Service Diagnostics, 4-6
6300/6350 menu map, A-12
6360 menu map, A-13
button functions, 4-7
diagnostic fault history, 4-9
exiting, 4-8
main menu, 4-6
print menu map, 4-7
reseat controller board error, 4-7
starting, 4-7
status reporting, 4-9
test descriptions, A-14
test print generation, 4-9
Service Kits, 9-61
Chute Assy Gear Kit
part number
, 9-58
Feed Roller Kit
contents
, 9-61
part number, 9-58
Gear Kit
contents
, 9-63
Hardware Kit
contents
, 9-63
part number, 9-58
Harness Kit
contents
, 9-64
part number, 9-58
Long-Life Maintenance Kit
contents
, 9-62
part number, 9-58
Sensor Acutator Kit
contents
, 9-62
part number, 9-58
Spring Kit
contents
, 9-61
part number, 9-58
Tray Holder Kit
part number
, 9-58
service mode, A-21
Service Usage Profile, 3-3
description, 3-3
engine error log, 3-3
display format, 3-3
error logging, 3-3
Solenoid tests, A-19
Specifications, 1-12
electrical, 1-12
environmental, 1-16
functional, 1-14
image, 1-15
media, 1-18
memory, 1-12
Spring Kit
contents
, 9-61
part number, 9-58
standard mode, 2-6
Startup page
network parameters
, 4-22
POST error reports, 4-4
startup process, 4-2
status codes, A-6
Status page, 3-3
Stopper Strap
part number
, 9-19
removal, 8-51
T
Temp/Humidity Sensor, 2-40
connector location, 10-8
location, 2-21
part number, 9-35
removal, 8-110
sensor failure error, 3-8
wiring, 10-22
test pattern sample, 5-7